Dynon Certified panels feature SkyView HDX, Dynon’s flagship integrated avionics platform that replaces your legacy equipment with a modern, affordable system.
SkyView HDX can do it all:
All of your flight instruments - fully capable of IFR - plus angle of attack, synthetic vision, and much more.
Whether you’re a “rich of peak” or “lean of peak” fan, you’ll have all the tools you need - including % power - to effectively manage your powerplant. Other advanced features include fuel computer and all EGT/CHTs.
Gain superior situational awareness with full ADS-B In Traffic and Weather.
Full-featured autopilot with advanced features like Flight Director, VNAV, altitude pre-select, and coupled approaches (when connected to an IFR navigator).
No need to install a separate 2020-compliant ADS-B Out solution - SkyView HDX has you covered.
Full-featured and intuitive flight planning and mapping, including optional charts, airport diagrams, and procedures.
Installing SkyView HDX does not change aircraft certification basis or operating limitations. All primary flight instruments, including attitude, are fully IFR capable, with backup provided by an independent second EFIS. SkyView HDX is additionally compatible with popular IFR navigators like the Avidyne IFD series and the GTN/GNS series.
SkyView HDX and STC System Prices for Cessna 172, Models F through S
|CURRENTLY APPROVED AND AVAILABLE NOW|
|STC Permission Statement & Letter of Authorization||$2,000|
Basic Package (minimum required equipment)
Includes 10” SkyView HDX primary display; all required flight instruments; integral moving map and VFR GPS Navigator; separate self-contained EFIS-D10A back-up flight instrument
|Second 7” or 10” SkyView HDX Display||$3,540/$4,930|
Class I Mode S transponder with ADS-B Out capability; 2020-compliant high integrity GPS position source; ADS-B In dual-band traffic/weather receiver
2-axis autopilot with: roll-axis HDG, TRK and NAV modes; pitch-axis altitude preselect, capture and hold; lateral and vertical navigation and ability to fly fully-coupled instrument approaches (if aircraft is suitably equipped with IFR navigation source)
Full engine instrumentation for 4-cylinder Lycoming engine, including all-cylinder CHT/EGT, fuel flow monitoring, and fuel computer
25 kHz VHF Com radio with innovative panel-mounted control module
Network cables are required to interconnect many of the SkyView system modules. Cost of network cables is estimated. Final cost will depend on sub-systems and options selected.
|$300 to $500|
IFR Connectivity Kit
This kit is required for connectivity with an IFR GPS Navigator or multi-function IFR GPS/NAV/COM. Aircraft equipped with two IFR GPS navigators require two “IFR Connectivity Kits”.
Dedicated Autopilot Mode Control Module and Knob Control Module
SkyView’s integrated autopilot may be fully controlled through the SkyView HDX display. These optional panel modules give the pilot dedicated controls for these functions, similar to legacy autopilot systems and those found in corporate and commercial aircraft.
To request updates to Dynon Certified, updates to approved model lists and more, sign up below.