EFIS-D10A

Over 15,000 experimental and LSA aircraft already fly with Dynon glass panel products. Based on this success, the EAA, FAA, and Dynon partnered to gain FAA approval for the installation of Dynon’s EFIS-D10A in type certificated GA aircraft.

Dynon’s first STC’d products are the EFIS-D10A and EFIS-D100. The EFIS-D10A is a full 4” Primary Flight Display. This product features attitude, airspeed, altitude, turn rate, inclinometer, g-meter, up/down timers, clock, and voltmeter. Battery backup provides power in event of aircraft electrical system failure. Other optional capabilities include angle of attack, magnetic heading, OAT, true airspeed, winds aloft, and density altitude.

EAA STC Approved Model List. Check Out The EFIS-D100 FAQs
Dynon Avionics EFIS-D10A Primary Flight Display
Dynon Avionics EFIS-D10A Primary Flight Display
Dynon Avionics EFIS-D10A Primary Flight Display
Dynon Avionics EFIS-D10A Primary Flight Display
EFIS-D10A SPECS

Weight and Dimensions

EFIS-D10A: 1lb 7.4oz


Dimensions: 4.09”W x 3.39”H x 7.64”D


Screen: 3.8” diagonal


GPS-251 for EFIS-D10A: 6.7 oz


EDC-D10A Remote Magnetometer (optional): 3.6 oz


Backup Battery: 6.4 oz


OAT Probe (optional): 2.6 oz


AOA Probe (optional): 5.7 oz


Wiring Harness (optional): 9.6 oz

Connections

Wiring: D-25 male connector


Plumbing: 1/8” NPT (female) each for pitot, static and angle of attack


Audio: Alarm signal for input to intercom or audio panel

Other Specifications

Voltage: 10 - 30 Vdc


Power: 13 watts normal operation, 17 watts (max) if internal battery is charging


Temperature: -22 to 122 F (-30 to 50 C)


Airspeed: 20 - 325 knots indicated


Altitude: -1200 to 30,000 Feet


Attitude: Automatic recovery from rates greater than 150 degrees per second in roll, pitch and yaw. In-flight start capability.


G-Meter: -10 g’s to +10 g’s


OAT: -40 to 140 F (-40 to 60 C)

HOW TO PURCHASE YOUR EFIS AND STC

The EAA's STC specifies out a Commercial Parts List, specifying part number 102778-000 (EFIS-D10A EAA Sales Kit), which is the super-set of acceptable components for installing a Dynon EFIS in eligible aircraft . This part is not orderable itself. Per the Instructions for Continued Airworthiness (P/N TJJ-MAN-01) for the EAA STC, some components are required, while some are optional.

Dynon Avionics EFIS-D10A Primary Flight Display
Required Components
100538-000: Dynon EFIS-D10A System, Retail (Includes EFIS-D10A, 100321-000;
   Mounting Accessories, 100351-000; Short 7/64 Hex Wrench,100556-000)
100096-000: Dynon Internal Backup Battery for D10/D100 Series
102827-000: Dynon GPS-251 GPS Receiver/Antenna Module for D10/D100 Series

Optional Components
100323-000: Dynon EDC-D10A Remote Compass
100433-001: Dynon OAT Probe for D10/D100 Series (requires EDC-D10A)
100141-000: Dynon AOA/Pitot Probe, Unheated
102832-000: Dynon Simplified Wiring Harness for D10/D100 Series w/ GPS-251 support
100024-000: D10 Series Flush Mount Bracket
102813-000: AOA/Pitot Mount Bracket (note that this bracket was intended for use with Vans RV series aircraft. Although approved under the EAA STC, it may require significant modification for use in other aircraft)


WHERE TO PURCHASE

Although eligible EFISs and accessories are bought from Dynon and its dealer network, the STC itself is owned and distributed by the EAA.
Buy the STC from the EAA...

Buy your EFIS and accessories...

And have your own A&P or shop install

FIND OUT MORE

To request updates to Dynon Certified, updates to approved model lists and more, sign up below.

We're happy to take your call at +1 (425) 402-0433. Please ask for either sales or technical support.