banner

Specifications

Mechanical

Mounting: Fits into standard 3 1/8” panel hole

Optional flush mount bracket available

Weight: 1 lb. 4 oz. (.57 kg)

Environmental

Operating Temperature: -22 to 122 F (-30 to 50 C)

Power

Voltage: 10 - 30 Vdc

Power: 10 watts maximum

Connections

D-25 female connector
D-37 male connector

Screen

Type: AMLCD, TFT (Thin Film Transistor)

Backlight: 450 NIT , user adjustable down to 1.8 NIT

Size: 3.8” diagonal (96 mm)

Resolution: 320 x 240 color pixels

User Interface

Menu: Softkey menus

Buttons: 6

Power On/Off: Furthest left button

Momentary press to turn on

Hold for 2 seconds to turn off

Hotkeys: Page switching, furthest left button

Instrument switching, furthest right button

Timers

Flight: Current flight, 99 hrs 59 min max

Trip: Total trip hours for tracking multiple leg flights, can be reset via softkey, 99 hrs 59 min max

Tach: 99999.9 hrs max

Hobbs : Activated by oil pressure, 99999.9 hrs max

Sensor Inputs

6 - EGT (Type K Thermocouple)

6 - CHT (Type J Thermocouple)

2 - Fuel Level (Resistive or Capacitance with 5 volt output)

2 - RPM (Frequency)

2 - Contacts (Canopy, Landing Gear, Fuel Switch, Carb Heat, Fuel Pump, Contact 1, Contact 2)

1 - Manifold Pressure (Voltage)

1 - Oil Temperature (Resistive)

1 - Oil Pressure (Resistive)

1 - Fuel Pressure (Resistive)

1 - Fuel Flow (Frequency)

1 - Amps

1 - Volts

1 - Turbine Inlet Temperature (Type K Thermocouple)

3 - General Purpose (Either resistive or voltage for OAT, Fuel Tanks 3 & 4, Coolant Temp/Press, Carb Temp)

Outputs

1 - Alarm Light Contact

1 - Audio Alarm

1 - RS-232

2- DSAB (Dynon Smart Avionics Bus)