NOW AVAILABLE

NOW STC APPROVED FOR TYPE CERTIFICATED AIRCRAFT

EFIS-D10A and EFIS-D100

Dynon Avionics' best-selling EFIS-D10A and EFIS-D100 are now STC approved for installation in type certificated aircraft.

Over 15,000 experimental and LSA aircraft already fly with Dynon glass panel products. Based on this success, the EAA, FAA, and Dynon partnered to gain FAA approval for the installation of Dynon’s EFIS-D10A and EFIS-D100 in type certificated GA aircraft.

Dynon’s first STC’d products are the EFIS-D10A and EFIS-D100. The EFIS-D10A is a full 4” Primary Flight Display, while the EFIS-D100 is the only 7” widescreen PFD available for type certificated aircraft. Both products feature attitude, airspeed, altitude, turn rate, inclinometer, g-meter, up/down timers, clock, and voltmeter. Battery backup provides power in event of aircraft electrical system failure. Other optional capabilities include angle of attack, magnetic heading, OAT, true airspeed, winds aloft, and density altitude.

Unique to this STC, EAA, Dynon, and the FAA worked together to allow the EFIS-D10A / EFIS-D100 to be installed without the traditional Technical Standard Order (TSO) or Parts Manufacturer Approval (PMA) requirement. Dynon’s product is also verified against the recently developed ASTM 3153-15, Standard Specification for Verification of Avionics Systems. The EFIS-D10A and EFIS-D100 are the same commercial products that have been available to experimental and LSA customers for years.

The EAA STC allows aircraft owners to install a modern Dynon EFIS in their type certificated aircraft. The EFIS-D10A or EFIS-D100 can replace one’s existing primary attitude indicator, or added added as a backup. The recently-updated approved model list now covers many Cessna, Piper, Beechcraft, Grumman, Mooney, and Maule models.

Download the EFIS-D10A Informational brochure
Download the EFIS-D10A Brochure
Download the EFIS-D10A Media Kit
Download the EFIS-D10A Media Kit

EFIS-D10A AND EFIS-D100 FEATURES


AIRCRAFT APPROVED UNDER THIS STC
THOUSANDS OF ELIGIBLE AIRCRAFT

EAA STC allows for installation in a number of aircraft listed below..

The EFIS-D10A is an STC’d replacement for the failure prone attitude indicator in type certificated GA aircraft.
STC APPROVED PRIMARY FLIGHT DISPLAY

Both products are STC’d replacements for the failure prone attitude indicator in type certificated GA aircraft.

Features included with Dynon Avionics best-selling EFIS-D10A
FEATURES

Attitude, Airspeed, Altitude, Turn Rate, Inclinometer, G-Meter, Clock, Up/Down Timers, Voltmeter, Battery Backup. Options include Angle of attack, Stabilized Magnetic Heading, OAT, Density Altitude, True Airspeed, and Winds.

FAA APPROVED MODEL LIST


Beechcraft Bonanza / Debonair
Beechcraft Musketeer / Sundowner / Sierra
Beechcraft Skipper

Cessna 150/152 - Commuter / Commuter II / Aerobat
Cessna 172 - Skyhawk
Cessna 175 - Skylark
Cessna 177 - Cardinal
Cessna 180/185
Cessna 182 - Skylane
Cessna 205 / 206 / 207
Cessna 210

Grumman AA-1/AA-5 - Yankee / Tiger

Piper PA-24 - Comanche
Piper PA-32 - Cherokee Six / Lance / Saratoga
Piper PA-28 - Cherokee / Warrior / Archer / Dakota
Piper PA-38 - Tomahawk

Mooney M20

Maule M-4/5/6/7

To confirm that your particular aircraft model and type certificate is eligible, check the EAA STC Approved Model List.

HOW TO PURCHASE YOUR EFIS AND STC

The EAA's STC specifies out a Commercial Parts List, specifying part number 102778-000 (EFIS-D10A EAA Sales Kit), which is the super-set of acceptable components for installing a Dynon EFIS in eligible aircraft . This part is not orderable itself. Per the Instructions for Continued Airworthiness (P/N TJJ-MAN-01) for the EAA STC, some components are required, while some are optional. As of August 2016, those are:

Dynon Avionics EFIS-D10A Primary Flight Display
EFIS-D10A
Required Components
100538-000: Dynon EFIS-D10A System, Retail (Includes EFIS-D10A, 100321-000;
   Mounting Accessories, 100351-000; Short 7/64 Hex Wrench,100556-000)
100096-000: Dynon Internal Backup Battery for D10/D100 Series
102827-000: Dynon GPS-251 GPS Receiver/Antenna Module for D10/D100 Series

Optional Components
100323-000: Dynon EDC-D10A Remote Compass
100433-001: Dynon OAT Probe for D10/D100 Series (requires EDC-D10A)
100141-000: Dynon AOA/Pitot Probe, Unheated
102832-000: Dynon Simplified Wiring Harness for D10/D100 Series w/ GPS-251 support
100024-000: D10 Series Flush Mount Bracket
102813-000: AOA/Pitot Mount Bracket (note that this bracket was intended for use with Vans RV series aircraft. Although approved under the EAA STC, it may require significant modification for use in other aircraft)

Dynon Avionics EFIS-D100 Primary Flight Display
EFIS-D100
Required Components
100534-001: EFIS-D100 with Super-Bright Screen, Instrument only,
   Retail (Includes Instrument,100488-001; 7/64 Hex Wrench, 100556-000)
100096-000: Dynon Internal Backup Battery for D10/D100 Series
102827-000: Dynon GPS-251 GPS Receiver/Antenna Module for D10/D100 Series

Optional Components
100323-000: Dynon EDC-D10A Remote Compass
100433-001: Dynon OAT Probe for D10/D100 Series (requires EDC-D10A)
100141-000: Dynon AOA/Pitot Probe, Unheated
102832-000: Dynon Simplified Wiring Harness for D10/D100 Series w/ GPS-251 support
100422-000: D100 Series Mounting Tray (although technically “optional” for the STC, The D100 requires this mounting tray for all practical purposes)
102813-000: AOA/Pitot Mount Bracket (note that this bracket was intended for use with Vans RV series aircraft. Although approved under the EAA STC, it may require significant modification for use in other aircraft)
WHERE TO PURCHASE

Although eligible EFISs and accessories are bought from Dynon and its dealer network, the STC itself is owned and distributed by the EAA. The EAA’s pricing for the STC is expected to be announced by EAA Monday, July 25th at the start of AirVenture. EAA expects to take STC orders at AirVenture, with fulfillment commencing after the show.
Buy the STC from the EAA...

Buy your EFIS and accessories...

And have your own A&P or shop install

EFIS-D10A AND D100 SPECS

EFIS-D10A

WEIGHT AND DIMENSIONS

EFIS-D10A: 1lb 7.4oz


Dimensions: 4.09”W x 3.39”H x 7.64”D


Screen: 3.8” diagonal


GPS-251 for EFIS-D10A: 6.7 oz


EDC-D10A Remote Magnetometer (optional): 3.6 oz


Backup Battery: 6.4 oz


OAT Probe (optional): 2.6 oz


AOA Probe (optional): 5.7 oz


Wiring Harness (optional): 9.6 oz

CONNECTIONS

Wiring: D-25 male connector


Plumbing: 1/8” NPT (female) each for pitot, static and angle of attack


Audio: Alarm signal for input to intercom or audio panel
Dynon Avionics best-selling EFIS-D10A is now STC approved for installation in type certificated aircraft.

OTHER SPECIFICATIONS

Voltage: 10 - 30 Vdc


Power: 13 watts normal operation, 17 watts (max) if internal battery is charging


Temperature: -22 to 122 F (-30 to 50 C)


Airspeed: 20 - 325 knots indicated


Altitude: -1200 to 30,000 Feet


Attitude: Automatic recovery from rates greater than 150 degrees per second in roll, pitch and yaw. In-flight start capability.


G-Meter: -10 g’s to +10 g’s


OAT: -40 to 140 F (-40 to 60 C)

EFIS-D100

WEIGHT AND DIMENSIONS

EFIS-D100: 2 lb 4.3 oz


Dimensions: 6.95”W x 4.90”H x 4.51”D


Screen: 7” diagonal


Mounting Tray: 6.1 oz


GPS-251 for EFIS-D10A: 6.7 oz


EDC-D10A Remote Magnetometer (optional): 3.6 oz


Backup Battery: 6.4 oz


OAT Probe (optional): 2.6 oz


AOA Probe (optional): 5.7 oz


Wiring Harness (optional): 9.6 oz

CONNECTIONS

Wiring: D-25 male connector


Plumbing: 1/8” NPT (female) each for pitot, static and angle of attack


Audio: Alarm signal for input to intercom or audio panel
Dynon Avionics EFIS-D100 Primary Flight Display

OTHER SPECIFICATIONS

Voltage: 10 - 30 Vdc


Power: 13 watts normal operation, 17 watts (max) if internal battery is charging


Temperature: -22 to 122 F (-30 to 50 C)


Airspeed: 20 - 325 knots indicated


Altitude: -1200 to 30,000 Feet


Attitude: Automatic recovery from rates greater than 150 degrees per second in roll, pitch and yaw. In-flight start capability.


G-Meter: -10 g’s to +10 g’s


OAT: -40 to 140 F (-40 to 60 C)



ANSWERS TO YOUR QUESTIONS


How am I able to put a Dynon EFIS-D10A or EFIS-D100 in my type certificated aircraft?
The EAA, FAA, and Dynon combined their expertise to enable the installation of commercially available avionics systems into certain type certificated GA aircraft. Based on the success of our proven product development process in the experimental market, the FAA is authorizing STC installation of a Dynon EFIS as an attitude indicator in small GA aircraft. The EAA — with Dynon’s help — developed the STC. Customers buy the Dynon EFIS from their Dynon dealer/installer and the STC from EAA. Like any STC, installations must be signed off by an A&P with Inspection Authorization (IA) and will require an FAA form 337.

What is the pricing and availability of the EFIS systems configured for these applications?
Because of the novel approach of the EAA’s STC, pilots of type-certificated aircraft will install the same commercial EFIS instrument that is available for experimental and light sport aircraft. Therefore, pricing is the same as well. The EAA STC specifies part number 102778-000, which is the super-set of acceptable components for installing a Dynon EFIS in eligible aircraft. Per the Instructions for Continued Airworthiness for the EAA STC, some of those components are required, while some are optional. As of August 2016, those are:
Required Components
• EFIS Unit. Either of:
(1) 100538-000: Dynon EFIS-D10A System, Retail (Includes EFIS-D10A, 100321-000; Mounting Accessories, 100351-000; Short 7/64 Hex Wrench,100556-000)
(2) 100534-001: EFIS-D100 with Super-Bright Screen, Instrument only, Retail (Includes Instrument,100488-001; 7/64 Hex Wrench, 100556-000)
• 100096-000: Dynon Internal Backup Battery for D10/D100 Series
• 102827-000: Dynon GPS-251 GPS Receiver/Antenna Module for D10/D100 Series
• 102813-000: AOA/Pitot Mount Bracket

Optional Components
• 100323-000: Dynon EDC-D10A Remote Compass
• 100433-001: Dynon OAT Probe for D10/D100 Series (requires EDC-D10A)
• 100141-000: Dynon AOA/Pitot Probe, Unheated
• 102832-000: Dynon Simplified Wiring Harness for D10/D100 Series w/ GPS-251 support
• 100422-000: D100 Series Mounting Tray (although technically “optional” for the STC, The D100 requires this mounting tray for all practical purposes.)
• 100024-000: D10 Series Flush Mount Bracket
• 102813-000: AOA/Pitot Mount Bracket

What is the pricing of the STC?
The STC costs $100, and is available from EAA.

Who is Dynon?
Dynon Avionics is the leading producer of avionics for Experimental and Light Sport Aircraft, with over 15,000 aircraft equipped all over the world. The EAA chose Dynon for this STC because of its proven success in the market. Dynon’s product line spans from the D2 portable attitude indicator to its fully-integrated SkyView system. The EFIS-D10A was one of the first products Dynon released, with thousands installed and flown since 2004.

Why do I buy the STC from EAA and not Dynon?
The EAA’s relationship with the FAA was key to this program’s success. The EAA, with Dynon’s help, developed this novel STC approach. Dynon is the launch partner for this STC process.

What aircraft are approved under this STC?
As of January 2017, the the expanded EAA STC Approved Model List allows for installation in Beechcraft Bonanza, Debonair, Musketeer, Sundowner Sierra, and Skipper models; Mooney M20; Maule M-4/5/6/7; Grumman AA-1/AA-5; Cessna 150. 152, 172, 175, 177, 180, 182, 185, 205, 206, 210; Piper PA-24, PA-28, PA-32, and PA-38. Check the AML for your aircraft.

Is the EFIS-D10A / EFIS-D100 TSO’d? Does Dynon have PMA?
No. This STC demonstrates that Dynon commercial products are suitable for use in type certificated aircraft. Neither TSO nor PMA are required to allow the EFIS-D10A to be installed in aircraft covered by the STC.

What is the pedigree of the Dynon EFIS products?
EAA and Dynon successfully demonstrated that Dynon’s commercially-proven manufacturing and development process yields a product that is suitable for use in type certificated aircraft. The Dynon EFIS-D10A and EFIS-D100 are also verified against the recently developed ASTM 3153-15, Standard Specification for Verification of Avionics Systems, which Dynon Avionics was instrumental in creating.

Will the Dynon EFIS fit in my panel?
  • The 7” EFIS-D100 is 6.95” wide x 4.90” tall x 4.51” deep.
  • The 4” EFIS-D10A is 4.09” wide x 3.39” tall x 6.85” deep (standard hole mount) OR 7.64” deep (optional flush mount)

What does installation entail?
The STC allows the EFIS-D10A or EFIS-D100 to replace your primary attitude indicator, or it can be added as a backup/secondary. The EFIS-D10A requires power, pitot, static, Dynon’s GPS-251 Receiver/Antenna, an internal backup battery, and optionally Dynon’s AOA probe, remote magnetometer, and OAT.

Will the EFIS-D10A or EFIS-D100 fit in my panel?
In a Cessna 172, the EFIS-D10A occupies a slightly larger area than the space available when a conventional attitude indicator is removed. This requires a new subpanel with slightly different spacing.

How much does it cost to install?
Initially, this will depend on the installer’s rates and experience. The EFIS-D10A was originally designed to be installed by aircraft homebuilders with minimal experience, so professional installers will be impressed by how easy it goes in. The aircraft that EAA used for FAA acceptance tests was converted to the STC configuration, test flown, AND converted back to its original form all in just days. Some aircraft will need to have existing instrument spacing modified. This will require a new panel.

Can I install it myself?
STC installations ultimately require approval from an A&P with Inspection Authorization (IA), and will require an FAA form 337. Aircraft owners who work on their aircraft under the supervision and approval of an appropriately rated mechanic could apply this STC to their aircraft in that manner.

When will the EFIS-D10A, EFIS-D100, and associated STC be available?
The STC is available now from from EAA. Eligible Dynon products are currently available from Dynon and its dealers.

Do the EFIS systems that can be installed in a type certificated aircraft have the exact features as the EFISes available for the experimental market?
They are the same product and have the same capabilities. However, there are some features that are not currently approved for use in type certificated aircraft. One of these is autopilot.

How does the installation affect the Weight & Balance of my aircraft?
Typically, installing an EFIS-D10A changes the aircraft weight by less than 1 lb.

The Dynon EFIS will not fit in my panel. What can I do?
You must maintain the “six-pack” orientation of your existing primary flight instruments. In other words, you can not rearrange them. You may, however, use a new panel to change the spacing to accommodate the EFIS.

Installing the magnetometer or OAT will be hard in my aircraft. Do I need to install them?
You can choose to not install the magnetometer and/or OAT (the OAT connects through the magnetometer). In these installations, the EFIS-D10A will not be able to display magnetic heading, OAT, or winds. Note that your aircraft’s existing magnetic compass must remain in the aircraft regardless.

This EFIS has a lot of capability. All I want is an attitude indicator.
All of the other functions that the EFIS-D10A can provide are supplemental in nature. Strictly speaking, the EFIS-D10A is a replacement for your attitude indicator. All other capabilities, such as airspeed and altitude, can be suppressed. All of your other primary flight instruments are required to remain in your aircraft.

There is a GPS receiver/antenna for the EFIS, but there are no mapping functions in the product. What is the GPS for?
The EFIS-D10A’s attitude algorithm is normally aided by pitot-based airspeed information. If the EFIS-D10A’s airspeed source gets blocked, the EFIS will automatically use GPS ground speed to continue to display accurate attitude. The GPS antenna must be connected in an STC’d installation.

Is there a gyro inside the EFIS?
There are no moving parts or a conventional “gyro” in the EFIS-D10A or EFIS-D100. The attitude-sensing platform uses modern MEMS rate sensors and accelerometers.

Will the EFIS be damaged by aerobatics or unusual maneuvers?
No. The sensor platform inside of Dynon avionics is able to align only seconds after power up on the ground, and within 15-30 seconds in the air. Most aircraft cannot exceed the EFIS’s rate limits of 150 degrees per second of attitude change. If you do, the EFIS will automatically go into a self-recovery mode and re-align after a short period of straight and level flight — typically within 15-30 seconds.

I’m not in the US. Can I install a Dynon EFIS in my type certificated aircraft?
The FAA STC currently applies to aircraft governed by FAA regulations.

Can I add a Dynon EFIS to an aircraft that was not originally shipped with -- or does not have -- an attitude indicator?
The STC does not specifically cover this scenario, but it was not intended to preclude it. Check with your IA to see if they can approve such an installation.

Can I add an additional EFIS-D10A to replace my DG/HSI?
No. Right now the STC only allows the EFIS-D10A to be used as an attitude indicator. However, you can add a second attitude indicator elsewhere in the panel if you’d like. The STC does not restrict the number of attitude indicators installed in your aircraft. If your aircraft does not require a DG, you may be able to remove it and your vacuum pump after you install a Dynon EFIS under EAA STC.

Can I remove my DG / Vacuum Pump?
If an installed directional gyro is not required equipment per your aircraft’s type certificate, it can be removed (whether or not you are installing a Dynon EFIS). After you remove your DG and install a Dynon EFIS under this STC, your vacuum system may not be connected to any instruments. If this is the case, it can be removed too.