SkyView Engine Sensor Kits
Engine Probes & Packages
Dynon offers a variety of engine probes. These can be purchased individually, but are usually bundled in complete engine packages. Engine probe packages include the wiring harnesses and all probes required. The purchase of an engine package saves approximately 10% over buying its contents separately.
At present, Dynon offers engine probe packages for the following engines:
- EMSKIT-L4C, Lycoming/Continental, 4 Cylinder, Carbureted
- EMSKIT-L4F, Lycoming/Continental, ULPower, 4 Cylinder, Fuel Injected
- EMSKIT-L6C, Lycoming/Continental, 6 Cylinder, Carbureted
- EMSKIT-L6F, Lycoming/Continental, 6 Cylinder, Fuel Injected
- EMSKIT-RTX, Rotax 912
- EMSKIT-J22, Jabiru 2200
- EMSKIT-J33, Jabiru 3300
The table below presents the individual probes, harnesses and options available as well as what items are included in each engine package identified above.
|
EMSKIT-
|
||||||||
|---|---|---|---|---|---|---|---|---|
| PN | Item |
L4C |
L4F |
L6C |
L6F |
RTX |
J22 |
J33 |
| Engine Sensors | ||||||||
| 100405-001 | EGT, Hose Clamp 0.25-1.25”, Rotax |
2 |
||||||
| 100405-000 | EGT, Hose Clamp 1.25– 2.25” |
4 |
4 |
6 |
6 |
4 |
6 |
|
| 100404-000 | CHT, Bayonet 3/8-24 UNF |
4 |
4 |
6 |
6 |
|||
| 100578-000 | CHT, 12 mm Ring Terminal |
4 |
6 |
|||||
| 100434-000 | MAP , 0-60 In Hg, 1/8” hose) |
1 |
1 |
1 |
1 |
1 |
||
| 100411-002 | Oil Pressure, 1/8-27 NPT, 0-150 PSI |
1 |
1 |
1 |
1 |
|||
| 100409-001 | Oil Temperature, 5/8-18 UNF |
1 |
1 |
1 |
1 |
|||
| 100409-000 | Oil Temperature, 1/8-27 NPT |
|||||||
| 100411-000 | Fuel Pressure, 1/8-27 NPT, 0-30 PSI, Carbureted |
1 |
1 |
1 |
1 |
1 |
||
| 100411-001 | Fuel Pressure, 1/8-27 NPT, 0-80 PSI, Fuel Injected |
1 |
1 |
|||||
| 100468-000 | Carb Air Temperature, ¼-28 UNF , -50º to 150º |
1 |
1 |
|||||
| 100412-000 | Amps Shunt, 0 – 60 Amps |
1 |
1 |
1 |
1 |
1 |
1 |
1 |
| Wiring/Harnesses |
||||||||
| 10039-004 | EGT, 2 cylinder, 6' long |
1 |
||||||
| 100399-001 | EGT/CHT, 4 cylinder, 6' long harness |
1 |
1 |
1 |
||||
| 100399-002 | EGT/CHT, 6 cylinder, 6' long harness |
1 |
1 |
1 |
||||
| 100399-000 | Engine sensor main wire harness |
1 |
1 |
1 |
1 |
1 |
1 |
1 |
| 100399-003 | EIS adaptor cable (for backfitting GRT's EIS systems) |
|||||||
| 100436-001 | EGT thermocouple (type K) extension wire |
|||||||
| 100436-000 | CHT thermocouple (type J) extension wire |
|||||||
| Options | ||||||||
| 100403-003 | Fuel Flow, ¼” Female NPT, EI FT-60, .6-70+ GPH |
|||||||
| Notes | A |
B |
B |
|||||
A) Uses CHTs, Oil Temperature, Oil Pressure and RPM sensors supplied with the engine |
||||||||
Installation Guide: The SkyView Installation Guide contains all the information you need to plan your avionics panel.