AP74 Dedicated Autopilot Interface Module
Think of it as the only autopilot that comes with a COMPLETE set of primary flight instruments for free!
The AP74 Dedicated Autopilot Interface Module adds panel-mounted controls and LED light status indicators to your autopilot. A multi-purpose value knob allows quick adjustment of the BARO setting and the bugs used with the Autopilot. The AP74 adds the abilities to pre-arm which modes will be flown upon autopilot engagement and pre-select the target altitude and heading/track. Additional features include a built-in light level sensor to automatically adjust the screen brightness, and synthetic voice alerts when connected to an auxiliary input on your intercom.
Includes AP74 Horizontal or Vertical: 100756-001, AP74/AP76 Mounting Tray: 101049-000, AP74/AP76 Connector Kit: 100831-004, 7/64 Hex Wrench: 100556-000
Adding servos to any Dynon SkyView System or D10/D100 Series EFIS turns it into a full-featured dual-axis autopilot at a total cost that is comparable to other autopilot-only solutions.
Every Dynon autopilot can fly magnetic heading, GPS ground track, and horizontal NAV from any connected compatible radio* or GPS. In addition to being able to hold altitude, even the least expensive Dynon autopilot can fly to a new altitude and level off once it arrives. Additional standard features include emergency 180-degree turn capability, control wheel steering, and standard trim sensing and annunciation on all servos used on the pitch axis. And because Dynon’s autopilot is built on its best-selling EFIS systems, it can respect bank angle, airspeed, and G limitations too.
You May Also Be Interested In...
DRX Portable Dual Band ADS-B Receiver